AS/NZS 3678 - 400 XLERPLATE®

Product Description and Features

A high strength structural steel product with nominal yield strength of 400 MPa.

• Guaranteed minimum strength levels
• Excellent weldability
• Excellent formability

Produced to: AS/NZS 3678

Common Uses of this product

General fabrication, structural members, high rise buildings, bridges, storage tanks

Warnings

• This material should be used in conjunction with the appropriate structural design and welding standards.
• Maximum recommended temperature for hot forming 620°C. If heated above 620°C, mechanical properties may deteriorate.
• An untrimmed (Mill) edge may contain minor surface discontinuities as a result of the rolling process (refer Clause 7 AS/NZS 3678). It is recommended that a minimum of 50 mm be removed from each untrimmed edge.
• Where impact testing is required refer to AS/NZS 3678 - 400L15.

Product Details

Supply Conditions

• Thickness Range: 10mm-80mm
• Availability: by enquiry only
• Edge Condition: Trimmed
• Tolerances: AS1365
• Ultrasonic Inspection: AS1710 available
• Surface Inspection: BlueScope Steel (third party available)
• Certification: BlueScope Steel (third party endorsed available)

International standards

ASTM A572-50
ISO 630-E355B
JISG 3106-SM490A
EN 10 025-S355JR

Size Availability

For information on size availability Download XLERPLATE® and XLERCOIL® Product Information Brochure - Standard Range Products (25 kb)

Fabrication Performance

For full details on the chemical composition, mechanical properties and formability, Download 400 XLERPLATE® Datasheet (85 KB)