LYSAGHT®
Home > Brands > LYSAGHT® > Roofing & Walling > Walling
LYSAGHT MULTICLAD®
LYSAGHT MULTICLAD® wall cladding
Product Description and Features
LYSAGHT MULTICLAD® is an economical and attractive wall profile suitable for a wide range of commercial, industrial and residential applications. The long clean lines of LYSAGHT MULTICLAD® can be installed either vertically or horizontally. It can be supplied in either custom cut or stock lengths.
- Available in a range of COLORBOND® steel colours and ZINCALUME® steel
- Attractive trapezoidal multi ribbed profile
- 840mm wide cover makes it quick and easy to install.
Common Uses of this product
Walling in industrial and commercial projects such as warehouses, showrooms and retail premises; and residential markets such as garages, screens and fascias
Warnings
- Not recommended for roofing
- Available in New South Wales, please check with local sales office for availability in other states
- Lead and copper are not compatible with ZINCALUME® steel or COLORBOND® steel
- Read full details on Guidelines for using COLORBOND® steel & ZINCALUME® steel.
Product Details
Schematic
 |
Masses
| BMT | Material | kg/m | kg/m2 | m2/t |
|---|---|---|---|---|
| 0.35 | ZINCALUME® | 2.74 | 3.26 | 306 |
| 0.35 | COLORBOND® | 2.80 | 3.33 | 300 |
| BMT | Material | kg/m | kg/m2 | m2/t |
|---|---|---|---|---|
| 0.42 | ZINCALUME® | 3.26 | 3.88 | 258 |
| 0.42 | COLORBOND® | 3.32 | 3.95 | 254 |
Tolerances
Length: +0mm, -15mm
Width: +4mm, -4mm
Lengths
Available in custom cut lengths to suit the application requirements. Check with your local supplier on the maximum and minimum available lengths.
Material Specification
- ZINCALUME® steel made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass)
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 4, is made from zinc-aluminium alloy coated steel complying with AS1397-2001, G550 (550MPa minimum yield stress), AZ150 (150g/m2 minimum coating mass), or
- COLORBOND® prepainted steel complying with AS/NZS 2728:Type 6, is made from stainless steel complying with JIS G 4305, Grade 430 stainless steel, 430SS550. Subject to enquiry, or
- The base metal thickness is 0.35mm & 0.42mm
Colour Range
LYSAGHT® products are normally available in the standard range of COLORBOND® steel colours. View the standard colour range for:
COLORBOND® steel or
COLORBOND® Ultra and COLORBOND® Stainless steel or
Colour Chart for COLORBOND® Metallic steel
Please check with your local supplier regarding specific colour availability for individual products.
Maximum Support Spacings
The maximum recommended support spacings are based on testing in accordance with AS1562.1-1992, AS4040.0-1992 and AS4040.2-1992.
Wall spans consider resistance to wind pressure only.
The presure considered is based on buildings up to 10m high in Region B, Terrain Category 3, Ms=0.85, Mi=1.0, Mt=1.0 with the following assumptions made:
Walls:
Cpi=+0.20, Cpe=-0.65, Kl=2.0 for single and end spans, Kl=1.5 for internal spans.
These spacings may vary by serviceability and strength wind conditions for the particular project under consideration.
| Wall Support Spacings (mm): | ||
|---|---|---|
| Type of Span | BMT (mm) | |
| 0.35 | 0.42 | |
| Single Span End Span Internal Span Overhang | 1400 1800 1800 150 | 1700 1800 1800 150 |
- The data are based on pressures (see wind pressures table).
- Table data are based on supports of 1mm BMT.
Capacity & Load Tables
The wind pressure capacity table can be viewed in the LYSAGHT MULTICLAD® brochure. Download LYSAGHT MULTICLAD® (473 KB)
The information in this brochure is suitable for use only in areas where a tropical cyclone is unlikely to occur, as defined in AS 1170.2 - 2002.
** More information on the relevant Standards can be found at the Standards Australia Website.
For correct specification and installation of BlueScope Lysaght roofing and walling products in cyclonic areas, please Download LYSAGHT® Cyclonic Area Design Manual Steel Roofing & Walling (334 KB).
FAQs
